A generator is very essential to anyone since it ensures that your life does not come to a standstill in case of a shortage of power.
This machine is essential, especially for people who live in areas that experience power failure due to weather conditions such as storms and floods.
Therefore overloading a generator can be dangerous to you since it may fail to work and you will not be able to maintain power and heat in emergency situations that may arise.
Overloading a generator is when too many appliances are plugged into the generator, such a scenario causes the generator to exceed its designed wattage, and a circuit breaker can be useful to prevent overload.
Here are some of the signs that can help you tell if your generator is overloaded
A drop in power output
When you experience a situation where there is a reduction in power output in the generator that you are using. This is a clear indication that your generator is overloaded and something needs to be done to correct this situation.
Such an instance always occurs when the generator uses more output power than the amount that is required for it to function.
In such circumstances, the work performed by the generator is reduced to half due to the overloading of this machine hence inefficiency in the performance of the generator.
The fact that there is a drop in power output is an indication that the generator is defective, if such a condition is not curbed in time it may result in a reduction in its lifespan.
This is because when it operates above capacity it burns some parts which may result in severe damage rendering it useless hence serving a short period than it could have if the damage could have been prevented.
Soot becoming apparent in the exhaust
When you notice that soot is appearing at the exhaust of your generator, it’s usually a sign that something is wrong with this machine.
Leftover soot is not a common thing that should be seen on the generator, this is usually an indication that the generator is overloaded or is doing more than it can handle, which causes damage to it.
Some of the reasons why your generator can have soot is usually a result of poor filtering
A clogged filter usually hinders the proper ratio of gas to air which always prevent the efficient operation of a generator.
Although it may be tempting to run a generator without filters to save yourself from such a scenario, this is like a suicide mission since it can cause permanent damage to the generator that you are using.
When your generator has such a condition and proper precautions are not taken on time they result in other equipment that receives power from it which is an extreme expense.
When the generator starts to overheat
In case you are using the generator and you start hearing a loud noise from it, or rather you start to feel extreme heat from the machine which makes you to even feel uncomfortable, this is usually a sign that the equipment has a defect that needs to be checked.
When your generator is not well protected from circuit breaker then overheating becomes a reality that causes damage to other equipment that could be connected to the generator.
Not forgetting the fact that a long period of overheating can easily cause fire or explosion which have extreme effects.
Although overheating of the generator can be a result of insulation and blockage in the generator, we can not rule out the possibility of the generator being overloaded.
When there is sparkling at the brushes attached to the commutator
This can be a result of worn-out brushes which may cause reduced spring pressure. This is always an indication that the generator is not in the right condition.
Having it checked and correcting this overload issue can save you from replacing more parts that could have been damaged.
When speed and terminal voltage drastically changes
When the generator is not equipped with a governor, then overloading it will automatically affect terminal voltage and frequency.
Therefore when the generator is overloaded, there is a significant drop in output voltage to properly balance the energy transferred.
From the above lists, you can tell that overloading a generator is quite dangerous since it has gasoline that is usually flammable and if precautions are not put in place explosions might occur.
Therefore being able to notice if your generator is overloaded through instances such as overheating and noticing soot on the exhaust is vital to prevent more harm.
It also helps you to prolong the lifespan of your generator, since the generator you are using is operating within capacity hence less damage and more durability.
I’ve always been a lover of Mechanics and the engineering that goes on behind it. Naturally had a knack for fixing things and i’ve had lots of adventures that generators are second nature to me.